| View previous topic :: View next topic |
| Author |
Message |
dreed7235
Joined: 06 Aug 2009
Posts: 10
|
 Posted: Wed Dec 09, 2009 8:04 pm Post subject: Starting over
|
 |
|
| Hey Steve I am starting a new build and would like a shopping list. Motor has been ported and 3 mm seals supposed to be in it. Other than that wanting to go to a single with meth inj and make streetable 500 hp. Could you give me a shopping list of all that I need to buy as you would? I dont want to go too big and lose all the low end. And would I be able to buy from you? |
|
| Back to top |
|
 |
PLUTO
Joined: 25 Apr 2008
Posts: 270
Location: Fort Worth, TX
2003 Suzuki GSXR 1000R
|
| Posted: Fri Dec 11, 2009 5:39 pm Post subject:
|
|
|
| give me a list of what you already have and I will work on getting the right setup to achieve your goal |
|
| Back to top |
|
|
dreed7235
Joined: 06 Aug 2009
Posts: 10
|
| Posted: Fri Dec 11, 2009 11:13 pm Post subject:
|
|
|
| Street port, blitz front mount IC, racing beat 3 inch exaust, stock injectors/fuel rails, stock pump, everything else is stock. The research that i have done tells me how subjective this is. The most consistent thing that I have read was to find a good tuner and ask what they recommend. |
|
| Back to top |
|
|
PLUTO
Joined: 25 Apr 2008
Posts: 270
Location: Fort Worth, TX
2003 Suzuki GSXR 1000R
|
| Posted: Tue Dec 15, 2009 12:27 am Post subject:
|
|
|
| sounds like you might need a few things. not knowing the port you have, it may be hard to predict how much hp it can produce. let me try to come up with a few things and I'll email you the list. |
|
| Back to top |
|
|
dreed7235
Joined: 06 Aug 2009
Posts: 10
|
|
| Back to top |
|
|
|
