| View previous topic :: View next topic |
| Author |
Message |
BatmanNZ3
Joined: 29 Jun 2010
Posts: 2
Location: New Zealand
|
 Posted: Tue Jun 29, 2010 11:08 pm Post subject: Engine & fuel setup for E85
|
 |
|
Hi there,
We are in the process of building an 13B REW for E85 & hope to reach the magic 550HP/Rw.
Could you help by explaining your setup - fuel injectors, computer, porting, dowelled, turbo & ex housing etc.
Many Thanks. |
|
| Back to top |
|
 |
PLUTO
Joined: 25 Apr 2008
Posts: 270
Location: Fort Worth, TX
2003 Suzuki GSXR 1000R
|
| Posted: Tue Jun 29, 2010 11:41 pm Post subject: Re: Engine & fuel setup for E85
|
|
|
there's nothing special about running E85 fuel. You just need approximately 30% more fuel for the same setup. I would at least run 4 x 2200 cc injectors and fuel pumps that will support 800hp (rotary power) if you plan to support 550rwhp. Everything else is the same as tuning for race gas.
| BatmanNZ3 wrote: | Hi there,
We are in the process of building an 13B REW for E85 & hope to reach the magic 550HP/Rw.
Could you help by explaining your setup - fuel injectors, computer, porting, dowelled, turbo & ex housing etc.
Many Thanks. |
|
|
| Back to top |
|
|
BatmanNZ3
Joined: 29 Jun 2010
Posts: 2
Location: New Zealand
|
| Posted: Wed Jun 30, 2010 12:21 am Post subject:
|
|
|
Steve, thanks - what turbos would you suggest that would allow us to reach the 550hp,
we intend on running a bosch 044 to feed the 2 litre surge tank, SX 1000hp external pump to feed engine, 4x1600 & 2 x880 primary.
Haltech 2000 ecu, or possibly Motec M600 (funds????)
large extend port with race port exhaust, dowelled, balanced with 3mm PTS Apex seals.
The Turbo is the unknown - was thinking BW366 race cover, 0.84 or 0.90 Ex housing & 4 inch exhaust with turbosmart 45mm ext wg.
cheers |
|
| Back to top |
|
|
PLUTO
Joined: 25 Apr 2008
Posts: 270
Location: Fort Worth, TX
2003 Suzuki GSXR 1000R
|
| Posted: Thu Jul 01, 2010 5:30 pm Post subject:
|
|
|
BW366 will probably make 550hp but I would go with a BW472 or bigger for more flow and efficiency.
| BatmanNZ3 wrote: | Steve, thanks - what turbos would you suggest that would allow us to reach the 550hp,
we intend on running a bosch 044 to feed the 2 litre surge tank, SX 1000hp external pump to feed engine, 4x1600 & 2 x880 primary.
Haltech 2000 ecu, or possibly Motec M600 (funds????)
large extend port with race port exhaust, dowelled, balanced with 3mm PTS Apex seals.
The Turbo is the unknown - was thinking BW366 race cover, 0.84 or 0.90 Ex housing & 4 inch exhaust with turbosmart 45mm ext wg.
cheers |
|
|
| Back to top |
|
|
|
